Learn how to temper chocolate using the seeding method for a smooth, glossy finish and that satisfying snap! With a simple temperature chart, step-by-step instructions, and troubleshooting tips, you'll be ready to dip strawberries, coat truffles, and make homemade chocolate treats with confidence.
Set aside ¼ pound chocolate wafers or solid chocolate (chopped into small pieces using a serrated knife) for seeding the chocolate later.
Melt the chocolate: Melt the remaining ¾ pound chocolate wafers (see the Recipe Notes on methods). Use a digital thermometer or an infrared temperature gun to make sure the melted chocolate stays within 113 °F to 122 °F for dark and semisweet chocolate, or 104 °F to 113 °F for milk and white chocolate.
Cool the chocolate: Add the reserved chocolate a bit at a time, stirring until the chocolate cools to 81 °F to 84 °F for dark and semisweet chocolate, or 79 °F to 81 °F for milk and white chocolate. If any pieces of the reserved chocolate remain unmelted when you reach the cooling temperature, remove them before gently rewarming the chocolate.
Rewarm the chocolate: Gently rewarm the chocolate to 88 °F to 90 °F for dark and semisweet chocolate, 84 °F to 86 °F for milk chocolate, or 82 °F to 84 °F for white chocolate.
Test the temper: Spread a small amount of chocolate on a half sheet baking pan lined with a Silpat silicone mat or parchment paper. It should begin setting within about 3 to 5 minutes and develop a glossy finish with a firm snap once completely hardened. It's ready to use for dipping your treats.If the sample appears dull or bends but doesn't snap, the chocolate isn't in temper. Unfortunately, you'll have to start over by melting and seeding again.
Hold the chocolate: Keep the chocolate within its working temperature range: 88 °F to 90 °F for dark and semisweet chocolate, 84 °F to 86 °F for milk chocolate, or 82 °F to 84 °F for white chocolate.This requires a bit of ingenuity, so see the Recipe Notes for some ideas. Whatever method you choose, check the chocolate's temperature regularly to make sure it stays within the recommended working range for that type of chocolate. Overheating can take the chocolate out of temper, so test a small sample if you're unsure.
This recipe doubles well.
Recipe Notes
Chocolate chips can sometimes be tempered if they're made with cocoa butter, but many are formulated to hold their shape during baking, making them thicker and less convenient for dipping. For the smoothest results, I recommend using chocolate bars or couverture wafers instead.To melt your chocolate, you have a choice of how to go about it. Whichever method you choose, heat the chocolate gently and avoid exceeding the recommended melting temperature for your chocolate type. Overheating can damage its flavor and texture.
Use a microwave-safe bowl and melt in 20 to 30 second bursts at half power until the chocolate is almost melted. Remove from the microwave and stir until the chocolate is completely melted.
Use a saucepan or large bowl set above 1-inch of simmering water, being careful that the bottom isn't sitting in the water itself and being careful that no water gets in the chocolate.
Use a tempering machine set to 120°F (for dark or semisweet) or 110°F (for milk or white). Remove the bowl from the machine once the chocolate is mostly melted and stir until it is completely melted.
To hold your chocolate at the correct temperature, there are numerous ways to go. Here are a few ideas for holding the temperature:
Use a double boiler or short bursts at half power in the microwave, stirring between them, to rewarm the chocolate
Place your bowl on a regular heating pad turned to medium heat and covered with a dish towel
Use a tempering machine to hold the temperature
To warm just the surface of the chocolate, you can use a hair dryer set to low heat for a few seconds.